SANFORD CORP -- ROLL-ON STAMP PAD INKER -- 7510-00N012001
===================== Product Identification ===================== Product ID:ROLL-ON STAMP PAD INKER MSDS Date:01/14/1988 FSC:7510 NIIN:00N012001 === Responsible Party === Company Name:SANFORD CORP Address:2740 WASHINGTON BLVD City:BELLWOOD State:IL ZIP:60104-1940 Country:US Info Phone Num:312-547-6650 Emergency Phone Num:800-228-5635 CAGE:86874 === Contractor Identification === Company Name:SANFORD CORPORATION Address:2740 WASHINGTON BLVD. Box:City:BELLWOOD State:IL ZIP:60104 Country:US Phone:1-800-323-0749 CAGE:86874 ============= Composition/Information on Ingredients ============= Ingred Name:WATER CAS:7732-18-5 RTECS #:ZC0110000 Ingred Name:GLYCERIN CAS:56-81-5 RTECS #:MA8050000 OSHA PEL:15 MG/M3 TDUST ACGIH TLV:10 MG/M3 (MIST) 9293 Ingred Name:DIETHYLENE GLYCOL CAS:111-46-6 RTECS #:ID5950000 Ingred Name:POLYETHYLENE GLYCOL CAS:25322-68-3 RTECS #:TQ3500000 Ingred Name:DYE ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:THIS PRODUCT IS NOT CONSIDERED TOXIC UNDER FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS, TITLE 16, PART 1500.THIS PRODUCT IS CONSIDERED SAFE WHEN USED UNDER NORMAL USE CONDITIONS. Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:INGEST: CALL MD IMMED . INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ ARTF RESP) . ===================== Fire Fighting Measures ===================== Flash Point Method:PMCC Flash Point:>390F,>199C Lower Limits:NOT AVAIL Upper Limits:NOT AVAIL Extinguishing Media:NONE SPECIFIED BY MANUFACTURER. Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER. Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER. ================== Accidental Release Measures ================== Spill Release Procedures:WIPE UP WITH ABSORBENT MATERIAL AND DISCARD AS SOLID WASTE. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT SQUEEZE BOTTLE. KEEP CAP ON BOTTLE WHEN NOT IN USE. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NONE UNDER NORMAL USE CONDITIONS. Ventilation:NONE UNDER NORMAL USE. CONSULT LOCAL SAFETY/HEALTH AUTHORITIES IF ADDITIONAL GUIDANCE IS NECESSARY. Protective Gloves:NONE UNDER NORMAL USE. Eye Protection:NONE UNDER NORMAL USE CONDITIONS. Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:N1 Boiling Pt:B.P. Text:>550F,>288C Vapor Pres:<0.1 @72F Spec Gravity:1.2-1.3 @ 22C Evaporation Rate & Reference:NOT AVALIABLE Solubility in Water:COMPLETE Appearance and Odor:(ALL PHYSICAL/CHEM DATA ARE FOR INGRED 2.) WATER WHITE,CLEAR LIQUID,BLAND ODOR ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NOT AVAILABLE Stability Condition to Avoid:NOT AVAILABLE Hazardous Decomposition Products:NOT AVAILABLE ==================== Disposal Considerations ==================== Waste Disposal Methods:DISCARD AS SOLID WASTE. DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.